A Guide to Creating a Workout Routine!
So you're new to the lifting game or you're looking to make a big change in your resistance training program to spark some growth or break a plateau. Of course you are, the iron addiction has taken hold. The only way to cure it is to use more of it each session. I'm going to break down the different variables and parameters at your disposal and try to give you the tools necessary to put together something systematic, something that will prevent adaptation, something that will ultimately help you reach your goals, and something that should be a refreshing change from your standard muscle mag dribble. My biases will probably seep through a little bit here, but I hope to make this guide as comprehensive as possible nonetheless.
Maximum Effort (ME)
This form of training involves lifting at a very high level of intensity. Simplified, this means lifting a weight that is at 90% or greater than your 1RM.
Dynamic Effort (DE)
This is what is commonly referred to as speed or power work. You use sub-maximal loads and impose compensatory acceleration on the weight being moved. The parameters involved in this type of training vary widely, but generally 50-70% of your 1RM is the intensity level used. Sets are completed in a manner so that fatigue is negligible and maximum acceleration can be used on each working set.
Repeated Effort (RE)
This is the tool most often used by bodybuilders. The loads are considered relatively intense and performed until at or near muscular failure. The intensity level used for this type of training is generally somewhere around 65-85% of your 1RM. The state of fatigue associated with being at or near muscular failure can be achieved over the course of multiple working sets.
The Major Variables – Although this is not a totally comprehensive list, these are the variables most often manipulated in order to continue progressing toward your goals with a resistance training program.
Frequency
Frequency, in the context of resistance training, is the number of workouts performed in a given period of time, which is generally a week. The frequency at which muscles are used as prime movers in resistance training is an important variable that far too many people refuse to manipulate. Bodybuilding magazines have done their damage, and now the general lifting population has some ill-conceived notion that training each body part once per week is the only way to see gains.
Intensity
Intensity is not how hard you workout, but the amount of weight relative to your 1 repetition max, which can be estimated with fairly good accuracy when dealing with reasonably heavy weights. It is generally expressed as a percentage (e.g. 75% of a 1RM), although sometimes it is expressed as a multiple repetition max (e.g. 5RM). This variable is rarely varied as often as it should be. Your 8-12RM is not the only viable intensity for a bodybuilder, and, in fact, is not optimal if used in isolation.
Volume
Volume is typically calculated as the number of sets multiplied by the number of repetitions, which is essentially just the total number of repetitions performed in a training session. However, some people may go further and take the number of repetitions and multiply it by the weight used in each set and add up the total. For the sake of simplicity, and the fact that I find that form of calculating volume unnecessary for most, I will be referring to volume as the total number of repetitions performed in a training session for the remainder of this writeup. Once again, bodybuilding rags have trashed any validity this carried as an alterable training variable by recommending 3 sets of 8-12 repetitions for every exercise under the sun.
Rest Intervals
This is simply the amount of rest allowed between working sets of an exercise. This variable is often manipulated unintentionally due to the fact that people simply don't time their rest intervals, and it's not implemented with any kind of consistency. Lowering rest intervals at equivalent volume and intensity is a perfectly valid form of overload, as you are performing an equivalent amount of work in a shorter period of time (Increased density).
Exercise Selection
Okay, this one is pretty self-explanatory. It is the exercises that you are using in your routine. Generally, this seems to be overdone or never done. People do the same exercises day in and day out for years, or they change their exercises so damned frequently that tracking progress is an impossibility.
Training Split
Honestly, this variable doesn't need to be manipulated much on its own. I generally think of it is a function of the other variables. If you are training each muscle group three times per week at a fairly low volume each session, then a full body split is probably optimal. If you are training each muscle group two times per week at a more moderate to high volume, then an upper-lower split or some such similar split is probably optimal. It goes on like that.
Forms of Periodization – Essentially, periodization is the methodical alteration of training variables over the course of a training cycle. Training cycles are classified as microcycles, mesocycles, and macrocycles. Microcycles are most often the training week, but does not have to be limited to that exact amount of time. It is usually the smallest repeatable cycle of a training program. Mesocycles last anywhere from 4-12 weeks the majority of the time, but may extend for longer in certain cases. It is a collection of several microcycles. The macrocycle is the largest of periodization divisions; it consists of multiple mesocycles. Some macrocycles may last as long as a few years, as is often the case with Olympic athletes. This list is by no means comprehensive, but lists some of the most popular methods out there now.
Linear Periodization
As denoted by the name, linear periodization is the systematic increase or decrease in the value of a variable over the course of a mesocycle. Intensity is the variable most often manipulated in this manner, but it is certainly applicable to other training variables. A simple example would be the following, using intensity as an example: week 1: 60%, week 2: 70%, week 3: 75%, week 4: 80%, week 5: 85%, week 6: 90%, repeat.
Alternating Periodization
This form of periodization involves alternating variables each microcycle, but not necessarily in a linear manner. An example of this type of program is Power-Rep Range-Shock. During power week, intensity is between 80-85%, rest intervals are 3-5 minutes, and volume is at the lower end of the spectrum. During rep range week, intensity is between 70-80%, rest intervals are 1-2 minutes, and volume is fairly high. During shock week, intensity is between 60-80%, rest intervals are 1 minute or less, volume is moderate, and the level of effort relative to muscular failure is very high. The vanilla version of the program has you alternate between each week in order and repeat for 9-12 weeks before unloading for a week via active recovery or total abstinence from heavy resistance training.
Undulating Periodization
This form of periodization involves alternating variables within each microcycle or even within each individual training session.
Conjugate Periodization
Conjugate periodization may incorporate other forms of periodization within itself. It is a little different in that the variables are alternated to train multiple facets of performance or health related fitness (e.g. Muscular strength, muscular size, power, cardiovascular endurance, etc.) within an individual microcycle or training session. An example of this form of periodization is evident in the popular powerlifting protocol Westside. A minimum of four sessions take place each week. Two sessions are devoted to training the bench press and two sessions are devoted to training the squat/deadlift.
All of these sessions include usage of the repeated effort method of training. One of both the squat/deadlift session and bench press sessions contains maximum effort training, and one of each contains dynamic effort training. In addition to these four sessions, one who has sufficient work capacity will also perform GPP/active recovery work. GPP (General physical preparedness) work is geared toward improving or maintaining other facets of performance related fitness besides the area that is specific to your goal (SPP, specific physical preparedness) such as aerobic capacity, mobility, or muscular endurance.
Other Things to Consider– All of this information should be helpful, but there are other things that you must consider if you want results.
Overload
This is all well and good, but if you don't organize your periodization scheme or routine to allow for you to continually improve, then you won't see results. If you don't make attempts to perform a higher level of volume, use a greater intensity at equivalent volume levels, increase the density of your workload by lower rest intervals, or some other form of overload, then you will not progress. You need to provide your body with the proper stimulus.
Consistency
It is impossible to tell if your program is at fault, your diet is at fault, or your slacking is the cause of your lack of results if you aren't being consistent with your training and diet. You can't make judgments on altered performance levels based on a routine that wasn't fully adhered too. Furthermore, you can't make judgments on a routine that is also dependent on diet if the diet was not followed to a high level of accuracy.
Diet
Don't neglect diet, period. I don't care if your goal is to lose weight, put on mass, get stronger, or run a marathon. Diet is of utmost importance, not to mention a big determinant in how healthy you are overall. It also has a drastic effect on recovery. A garbage diet is going to limit the level at which you can raise your work capacity and increase the frequency of your training.
Sleep
Good sleeping habits play an important roll in maintaining the health of your endocrine system, maintaining sanity/mental clarity, and allowing for proper recovery. Train hard, but rest accordingly.
Duration of Each Session
You don't need to train for 3 hours each time you hit the gym. If you follow these parameters, then you shouldn't be involved in heavy resistance training for much longer than an hour each session. It becomes counter-productive at a certain point as your endocrine system responds negatively to lengthy and stressful sessions of exercise.
----------------------------------
CONCLUSION:
Everyone does respond differently, that's obvious. But perhaps this could be the basis of your program and can help you develope an efficient one that fits your goals and needs without any flaw. Everyone has different theories, but just starting out or need a new routine you could refer back to here!
Sources: One main site written by Vladimir Zatsiorsky, not me. Found it and put it up with a little addition to it :)
Enjoy! HOPE this helps!
Kev
