[shawn2197]

ok i got 22g 1.5 inch needles, the numbers on them are as follows

10 1
20
30 2
40
ML/CC
now i have a vial of eq which says 200mg/ML 10ML, now on the needle does the 10 equal 1 ML which i think is 200mg, or does the little line way berfore the 10 equal 1ML, im so cunfussed, i dont want to suck out 10ML by accident and inject 1000mg of gear, but the 1 little line way before the 10 seems like way to small of a dose thats why i think the 10 stands for 1 ml and so on, insight is great cause i wanted to start today

[king james]

im not 100% sure without looking at mine but how many cc is it on your seringe, im guessing 3?

i could pick 1-3 and i only want to pin 1cc at a time with my test so i got one so i wouldnt mess up.

and i i dont think you need to worry about putting all of it in your system cause if the bottle is empty that you are drawing from that should indicate that you used to much.

[Con3151]

10 is equal to 1ml, 1ml= 200mg of Eq. Check to see what CC the actual syringe barell is.

[shawn2197]

40ML is the max on the left and 3cc max on the right

[Genghis]

Originally Posted by shawn2197

40ML is the max on the left and 3cc max on the right

Wait for LiL BiG JuNiOr to reply to this thread, he'll help ya defo

[ZackKnight]

Con is really good. he knows what's up on a lot of stuff.

[harmankardon1]

if your worried put your vile up to the syringe you have a ten ml vile right?..... so take roughtly 10% and dont empty the vile you know then you have drawn to much.

[Freak]

If you could post a pic that would be best. Don't do anything until you get some confirmation.

[Nebraska1]

Con is right. Your got a 3cc needle....and it reads in ml not cc'c correct ? So if your pinning Test E and you want to pin 250mls then you would draw HALF your needle full. 3cc's equals 600mls

[Nebraska1]

sorry ...meant 3cc is 500mls. If im wrong please correct me

[Zomb131]

Originally Posted by Nebraska1

sorry ...meant 3cc is 500mls. If im wrong please correct me

Originally Posted by Nebraska1

Con is right. Your got a 3cc needle....and it reads in ml not cc'c correct ? So if your pinning Test E and you want to pin 250mls then you would draw HALF your needle full. 3cc's equals 600mls

INCORRECT BAD INFORMATION!!!!

if the test is 250mg/ml (250mg's PER ml) then 3cc = 750mg's

WTF is a 3cc needle? There are no such things. There are 3cc syringes. 1ml = 1 cc.

If you wanna do a 250mg shot, that is 1cc. 1.5cc = 375mg's

[Zomb131]

Originally Posted by shawn2197

ok i got 22g 1.5 inch needles, the numbers on them are as follows

10 1
20
30 2
40
ML/CC
now i have a vial of eq which says 200mg/ML 10ML, now on the needle does the 10 equal 1 ML which i think is 200mg, or does the little line way berfore the 10 equal 1ML, im so cunfussed, i dont want to suck out 10ML by accident and inject 1000mg of gear, but the 1 little line way before the 10 seems like way to small of a dose thats why i think the 10 stands for 1 ml and so on, insight is great cause i wanted to start today

Wow, you are confussing. Since your EQ is 200mg/ml that means 200mg = 1cc = 1ml. Say you wanna do a 400mg shot, well that is 2cc/or 2ml.

[shawn2197]

im confuseing, ya i am cause im confused hahaha, anyways, ok yes it is a 3cc syringe and i want to do 400mg so i'll pull it back to 2cc, you guys are great thanks for the advice, now i feel safe to start it.