[lil_big_junior]

Ok, as you are all aware, I've planned to start my next cycle by March on Primo, Test E, Var & Tbol. Well today is the day, I got my self sat down, cleaned my quads & prepared my first pin with the Primo at 5mls. As I was just about to put the pin in my leg I realised there were ****in thousands of little tiny air bubbles, almost as if they were the size of little dust particles in the USP that didn't want to move. As you all know I'm NO newbie on this subject but what the **** is that about??? Of all the years I've used & researched gear I've never had this before, it kinda put me off. My syringe is still sitting there atm waiting to be pinned but I'm not touching it until I've had reasurrance from some ppl, all are welcome to answer but I value Rocco, Zomb1 & Triddy's opinion over anyones.

Most of the little air bubbles are now gone (after 30mins to an hr it took to clear) but still need a little reasurrance before I pin...this is the first time I'm pinning again in over a year & I can't wait anymore, I need to start

Thx in advance fellas

[Kaboom]

Im neither one of them guys and know you have answered many of my questions but I ahave seens this when I accidently inject air into the gear itself and then try to withdraw it into the syringe.I would tap the syringe some and just wait.it would eventually go away and then I would pin.Sometimes I would actually put some back in the vial just to push the airbubbles out and do it again.
Dont know if this is what you are seeing or not but its my experience.

[heath95]

i get them to lbj with my test e but it seems to be for me atleast the gauge needle im using to draw 23 to 25g i get them bad i just push it back in a re draw 18to 22g i get almost none hope this helps **** as much as you helped me in the past hope i can return the favor

[lil_big_junior]

Yeah maybe it has something to do with the gauge of the pin. I've always used 21G 1.5" (it's the only size I can get around here) with all oil based including Primo & had no problems, but then again I've never used Primo by this lab before & the USP maybe different. I'll try using another sized pin. Thx bros

[TRiddy05]

LBJ, I always get lots of airbubbles when drawing, particularly with 19-20g needle or from amps. If you turn the syringe needle side up and flick the syringe with your index finger they should start to move toward the top (Id recap the syringe while you do this, to prevent accidentally sticking yourself or acciedentally making the needle insterile in some other way). It might take a couple of minutes and you have to flick it fairly hard but eventually most will rise to the top and you can push the air that accumulates at the top out by pressing down on the plunger. Its a good habit to get rid of the bubbles, but it would take like 3cc of air injected intraveneously to kill you. On a side note, 5cc in muscles that you havent injected in a year, you know what your doing but **** that sounds painful to me. Anyway good luck with your cycle bro.

[lil_big_junior]

LOL thx for your input bro, I tried doing all that already when I first drew the gear, but the bubbles didn't want to move, I mean the thing is, all that kept going through my head at the time was 'I wonder if this is real, lol, it looks real, everything matches up' BUT...the last thing anyone wants to do is pin motor oil, lol...Thx for stopping by Triddy, much appreciated. I've ordered different pins, should be here within next 2 days, I'll be pinning that syringe I drew up couple days ago tonight when I get home.

Thx once again fellas

[Zomb131]

^^ I always prep my injections the night before because of this reason. The air bubbles are usually caused when drawing the oil from the vial. Depeding on how thick the oil is it could take a WHILE for them to go away. A few ways to prevent this would be set up everything the night before and wait till morning...or get a larger gague pin....like an 18 gague. Smaller the pin i've noticed the more air bubbles get made.

[lil_big_junior]

Yeah I agree with that bro, it's all simple sense to me now, it just threw me off as it's never happend to me before, LOL...
Thx bro